| Items | Technical standard | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Assigned frequency or designated frequency | 5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680, or 5700MHz | ||||||||||
| Number of channels or channel separation | 11 | ||||||||||
| Tolerance of frequency | 20x10-6 | ||||||||||
| Tolerance of occupied bandwidth | Within 19.7MHz | ||||||||||
| Tolerance of unwanted emission intensity | (1) Below 5460MHz : 2.5µW / MHz or less (2) Over 5740MHz : 2.5µW / MHz or less |
||||||||||
| Antenna power | (1) For OFDM or DS : 10mW / MHz or less (2) For others : 10mW or less Tolerance : +50%,-50% |
||||||||||
| Equivalent isotropically radiated power (EIRP) |
|
||||||||||
| Tolerance of adjacent channel leakage power and out-band leakage power |
|
||||||||||
| Limit of secondary radiated emissions | (1) Below 1GHz : 4nW or less (2) 1GHz - 10GHz : 20nW or less (3) 10GHz or higher : 20nW orl ess |
||||||||||
| Interference prevention function | Shall have a function to transmit or receive identification codes automatically | ||||||||||
| Carrier sensing function (1) | Shall not transmit radio wave when a receiving signal level is over 100mV/m | ||||||||||
| Carrier sensing function (3) (Dynamic frequency selection (DFS)) |
Refer to the Ordinance Regulating Radio Equipment. | ||||||||||
| Transmission burst length | 4ms or less | ||||||||||
| Note | DS: Direct spreading OFDM : Orthogonal frequency division multiplexing |
||||||||||
| Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations. |