Mobile station for dedicated short-range communications system (Item 32 of Article 2 Paragraph 1 of Certification Ordinance)
Base station for dedicated short-range communications system (Item 33 of Article 2 Paragraph 1 of Certification Ordinance)
Station for testing radio equipment for dedicated short-range communications system (Item 33-2 of Article 2 Paragraph 1 of Certification Ordinance)




Items

Technical standards

Class of emissions A1D
Assigned frequency or designated frequency Base: 5.775, 5.780, 5.785, 5.790, 5.795, 5.800, 5.805GHz

Mobile: 5.815, 5.820, 5.825, 5.830, 5.835, 5.840, 5.845GHz

Testing: 5.775, 5.780, 5.785, 5.790, 5.795, 5.800, 5.805GHz
Tolerance of frequency (×10-6) Base station
ASK modulation : 20
Other than ASK : 5
Mobile station
ASK modulation : 50
Other than ASK : 20
Testing station
5
Tolerance of occupied bandwidth 4.4MHz
Tolerance of spurious and unwanted emission intensity 25µW
Antenna power Designated value Base station : 0.3W or less
Mobile station : 0.01W or less
Tolerance Base / Testing station : +20%, -50%
Mobile station : +50%, -50%
Tolerance of adjacent channel leakage power -30dB (5MHz detuning, ±2.2MHz bandwidth)
-40dB (10MHz detuning, ±2.2MHz bandwidth)
Leakage power at no-carrier transmission 2.5µW or less
Transmission rate of modulation signal ASK modulation : 1024kbps (±100×10-6)
QPSK modulation : 4096kbps (±100×10-6)
Limit of secondary radiated emissions 2.5µW
Interference prevention function Shall automatically transmit or receive the designated identification code
Note Absolute gain of transmitter antenna
Base station: 20dBi or less
Mobile station: 10dBi or less
Testing station: 10dBi or less

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.

Copyright 2006 TELECOM ENGINEERING CENTER.