Specified low-power radio equipment (Item 8 of Article 2 Paragraph 1 of Certification Ordinance)
for 950MHz Band identification of moving objects




Items

Technical standards

Class of emissions N0N, A1D ,AXN, H1D, R1D ,J1D ,F1D, F2D, G1D
Assigned frequency or designated frequency Assigned frequency : 953.5MHz
(Designated frequency band : 952-955MHz)
Tolerance of frequency Within the designated frequency band
Tolerance of occupied bandwidth 200kHz
Tolerance of unwanted emission intensity (1)Below 1GHz (excluding 715 - 960MHz) : -36dBm / 100kHz
(2)715 - 945MHz : -61dBm / 1MHz
(3)945 - 950MHz : -61dBm / 1MHz
(4)950 - 956MHz (excluding detuing ±200kHz) : -39dBm / 100kHz
(5)956 - 960MHz : -61dBm / 100kHz
(6)Over 1GHz (excluding 1884.5 - 1919.6MHz) : -30dBm / 1MHz
(7)1884.5 - 1919.6MHz : -61dBm / 1MHz
Antenna power Designated value 0.01W or less
Tolerance +20%, -80%
Tolerance of adjacent channel leakage power -18dBm or less
Limit of secondary radiated emissions (1)Below 1GHz (excluding 715 - 960MHz) : -54dBm / 100kHz
(2)715 - 945MHz : -61dBm / 1MHz
(3)945 - 950MHz : -61dBm / 1MHz
(4)950 - 956MHz (excluding detuing ±200kHz) : -54dBm / 100kHz
(5)956 - 960MHz : -61dBm / 100kHz
(6)Over 1GHz (excluding 1884.5 - 1919.6MHz) : -47dBm / 1MHz
(7)1884.5 - 1919.6MHz : -61dBm / 1MHz
Transmission time restriction Transmission time : 1second or less
Transmission suspension time : 0.1second or more
Carrier Sensing Carrier sensing level : -64dBm
Time for decision : 10milli-seconds or more
Absolute gain of transmission antenna 3dBi or less
Note ----

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.

Copyright 2006 TELECOM ENGINEERING CENTER.