Premises radio (Item 6 of Article 2 Paragraph 1 of Certification Ordinance)
(4) 950MHz Band (Identification of moving object)


Items Technical standards
Class of emissions N0N, A1D, AXN, H1D, R1D
J1D, F1D, F2D, G1D
Assigned frequency or designated frequency Assigned frequency : 953MHz
(Designated frequency band 952-954MHz)
Tolerance of frequency Within the designated frequency band
Tolerance of occupied bandwidth 200kHz × n
Tolerance of unwanted emission intensity lower than 1000MHz (excluding 715-960MHz) -36dBm/100kHz
715-945MHz -61dBm/1MHz
945-950MHz -61dBm/100kHz
950-952MHz -39dBm/100kHz
952-954MHz (excluding the frequency displacement of 200+100 (n-1) kHz from the center of the channel) -29dBm/100kHz
954-956MHz -39dBm/100kHz
956-960MHz -61dBm/100kHz
higher than 1000MHz (excluding 1884.5-1919.6MHz) -30dBm/1MHz
1884.5-1919.6MHz -61dBm/1MHz
Antenna power Designated value 1W or less
Tolerance +20% , -80%
Limit of secondary emissions lower than 1000MHz (excluding 715-960MHz) -54dBm/100kHz
715-945MHz -61dBm/1MHz
945-950MHz -61dBm/100kHz
950-956MHz -54dBm/100kHz
956-960MHz -61dBm/100kHz
higher than 1000MHz (excluding 1884.5-1919.6MHz) -47dBm/1MHz
1884.5-1919.6MHz -61dBm/1MHz
Absolute gain of transmission antenna 6dBi or less
Note "n" is the number of channels used at the same time

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.

Copyright 2006 TELECOM ENGINEERING CENTER.