Specified low-power radio equipment (Item 8 of Article 2 Paragraph 1 of Certification Ordinance)
for Radio microphone




Test items

Technical standards

Radio microphone 70 MHz band
(Type D)
Radio microphone 300 MHz band
(Type C)
Radio microphone 800 MHz band
(Type B)
Class of emissions F3E or F8W F1D, F2D, F3E, F8W, F9W
(shall have the ability of telephone transmission)
F1D, F2D, F3E, F8W, F9W
(shall have the ability of telephone transmission)
Assigned frequency or designated frequency 74.58MHz
74.64MHz
74.70MHz
74.76MHz
(1) 322.025-322.15MHz
(2) 322.25-322.4MHz
806.125 - 809.75MHz
Number of channels and channel separation 4
60kHz
(1) 6 , (2) 7
25kHz
30
125kHz
Tolerance of frequency
(×10-6)
20 10 20
Tolerance of occupied bandwidth 60kHz
(at 3kHz deviation)
30kHz
(at 2.25kHz deviation)
110kHz
(at 5kHz deviation)
Tolerance of spurious and unwanted emission intensity 2.5µW 2.5µW 2.5µW
Antenna power Designated value 0.01W or less 0.001W or less 0.01W or less
Tolerance +20%, -50% +20%, -50% +50%, -50%
Tolerance of adjacent channel leakage power -60dB
(120kHz separation, 60kHz bandwidth)(at 3kHz deviation)
-60dB
(50kHz separation, 30kHz bandwidth)(at 2.25kHz deviation)
-60dB
(250kHz separation, 110kHz bandwidth)(at 5kHz deviation)
Limit of secondary radiated emissions 4 nW 4 nW 4 nW
Other equipment or function
-------
-------
-------
Note
-------
-------
-------

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.

Copyright 2006 TELECOM ENGINEERING CENTER.