Specified low-power radio equipment (Item 8 of Article 2 Paragraph 1 of Certification Ordinance)
for 1200 MHz band data transmission radio equipment


400 MHz band data transmission radio equipment


Test items

Technical standards

Used for telemeter, telecontrol or data transmission Used for telemeter, telecontrol or data transmission
Class of emissions F1 DF, F2 DF, F7 DF
G1 DF, G2 DF, G7 DF
D1 DF, D2 DF, D7 DF
F1 DF, F2 DF, F7 DF
G1 DF, G2 DF, G7 DF
D1 DF, D2 DF, D7 DF
Assigned frequency or designated frequency (8) 1216.0125 - 1216.9875MHz
(9) 1252.0125 - 1252.9875MHz
C-ch : 1216.0125, 1216.5125, 1252.0125, 1252.5125MHz
(10) 1216.000 - 1217.000MHz
(11) 1252.000 - 1253.000MHz
C-ch: 1216.000, 1252.000MHz
Number of channels and channel separation S-ch: (8) 38, (9) 38
25kHz
S-ch: (10) 20, (11) 20
50kHz
Tolerance of frequency (×10-6) 3 4
Tolerance of occupied bandwidth 16kHz 32kHz
Tolerance of spurious and unwanted emission intensity 2.5µW 2.5µW
Antenna power Designated value 0.01W or less 0.01W or less
Tolerance +20%, -50% +20%, -50%
Tolerance of adjacent channel leakage power -40dB (25 kHz separation, 16kHz bandwidth) -40dB (50kHz separation, 32 kHz bandwidth)
Limit of secondary radiated emissions 4nW 4nW
Other equipment or function Carrier sensing
Transmission time restriction(excluding 1216.0375 - 1216.5MHz and 1252.0375 - 1252.5MHz)
Interference prevention function
Carrier sensing
Transmission time restriction(excluding 1216.05 - 1216.5MHz and 1252.05 - 1252.5MHz)
Interference prevention function
Note ---- ----

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.

Copyright 2006 TELECOM ENGINEERING CENTER.