Convenience radio (Item 4-2 of Article 2 Paragraph 1 of Certification Ordinance)

Test items

Technical standards

(1) 150 MHz band (2) 400 MHz band
Class of emissions F3E F3E
Assigned frequency or designated frequency 154.450 - 154.610MHz 465.0375 - 468.8500MHz
Number of channels and channel separation 20kHz 12.5kHz
Tolerance of frequency
(×10-6)
20 1W or less : 4
Over 1W : 3
Tolerance of occupied bandwidth 16kHz 8.5kHz
Tolerance of spurious and unwanted emission intensity 1W or less Spurious : 100µW
Unwanted : 50µW
Spurious : 25µW
Unwanted : 25µW
Over 1W Spurious : 1mW and -80dBc
Unwanted : -60dBc
Spurious : 2.5µW
Unwanted : 2.5µW
Antenna power Designated value 5W or less 5W or less
Tolerance +20%, -50% +20%, -50%
Maximum frequency deviation or shift
-------
±2.5kHz
Tolerance of adjacent channel leakage power
-------
-60dB
Limit of secondary radiated emissions 4nW 4nW
Other equipment or function
Automatic identification device
Automatic identification device
Note
-------
-------

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.

Copyright 2006 TELECOM ENGINEERING CENTER.