F3E radio, etc

F3E radio, etc. (Item 1-15 of Article 2 Paragraph 1 of Certification Ordinance)

Test items		Technical standards
Test items		60 MHz band	150 MHz band	400 MHz band
Class of emissions		F2 ABCDNX F3E	F2 ABCDNX F3E	F2 ABCDNX F3E
Assigned frequency or designated frequency		54 - 70MHz	142 - 162.0375MHz	335 - 470MHz
Number of channels and channel separation		-------	-------	-------
Tolerance of frequency (×10^-6)		1W or less: 20 Over 1W: 10	1W or less: 15 Over 1W: 10	1W or less: 4 Over 1W: 3
Tolerance of occupied bandwidth		16kHz	16kHz	8.5kHz (On-board communication equipment: 16 kHz)
Tolerance of spurious and unwanted emission intensity	1W or less	Spurious : 100µW Unwanted : 50µW	Spurious : 100µW Unwanted : 50µW	Spurious : 25µW Unwanted : 25µW
Tolerance of spurious and unwanted emission intensity	Over 1W	Spurious : 1mW and -80dBc Unwanted : -60dBc	Spurious : 1mW and -80dBc Unwanted : -60dBc	Spurious : 2.5µW Unwanted : 2.5µW
Antenna power	Designated value	50W or less	50W or less	50W or less
Antenna power	Tolerance	+20%, -50%	+20%, -50%	+20%, -50%
Maximum frequency deviation or shift		±5kHz	±5kHz	±2.5kHz (On-board communication equipment : ±5kHz)
Linit of secondary radiated emissions		4nW	4nW	4nW
Pre-emphasis and de-emphasis (*)		-------	6dB/oct	6dB/oct
Overall distortion and noise of transmitter (*)		-------	-20dB or less	-20dB or less
Other equipment or function (*)		Selective calling device	Automatic identification device Selective calling device	Selective calling device
Note		(*): It is recommended to refer to the Radio Equipment Regulations for details because these items do not apply to all kinds of equipment.

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.