|
|
Technical standards |
|||
| (1) 27 MHz band | (2) 40 MHz band | (3) 150 MHz band | ||
| Class of emissions | A3E | A3E | A3E | |
| Assigned frequency or designated frequency | 26.100 - 28.000MHz | 29.700 - 41.000MHz | 146.000 - 162.0375MHz | |
| Number of channels and channel separation |
|
|
|
|
| Tolerance of frequency (×10-6) |
50Hz | 20 | Over 1W : 20 1W or less : 50 156-162.0375MHz : 10 |
|
| Tolerance of occupied bandwidth | 6kHz | 6kHz | 6kHz | |
| Tolerance of spurious and unwanted emission intensity | Over 1W | Spurious : 50mW and -40dB Unwanted : 50µW |
Spurious : 1mW and -60dB Unwanted : -60dB |
Spurious : 1mW and -80dB Unwanted : -60dB |
| 1W or less | Spurious : 1mW Unwanted : 50µW |
Spurious : 100µW Unwanted : 50µW |
Spurious : 100µW Unwanted : 50µW |
|
| Antenna power | Designated value | 50W | 50W | 50W |
| Tolerance | +20%, -50% | +20%, -50% | +20%, -50% | |
| Limit of secondary radiated emissions | 4nW | 4nW | 4nW | |
| Modulation factor | 70 % | 70 % | 70 % | |
| Overall frequency response characteristics | 6dB | 6dB | 6dB | |
| Overall distortion factorf and noise | 20dB | 20dB | 20dB | |
| Sensitivity | 10µV | 10µV | 10µV | |
| Passing bandwidth | 5kHz | 5kHz | 10kHz | |
| Spurious response | 40dB | 40dB | 40dB | |
| adjacent channel selectivity characteristics | 50dB | 50dB | 50dB | |
| Other equipment or function | (1) Automatic identfication device (2) Selective calling device (3) Modulation signal processing device |
(1) Automatic identfication device (2) Selective calling device (3) Modulation signal processing device |
(1) Automatic identfication device (2) Selective calling device (3) Modulation signal processing device |
|
| Note |
|
|
|
|
| Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations. |