|
Items |
Technical standards |
||
| Assigned frequency or designated frequency | Transmitter: 2010 - 2025MHz Receiver: 2010 - 2025MHz |
||
| Tolerance of frequency(Hz) | 0.1× f×10-6
+ 12 f : transmission frequency (Hz) |
||
| Tolerance of occupied bandwidth | 5.0MHz | ||
| Tolerance of unwanted emission intensity | Detuning frequency : 12.5MHz or more (1)9kHz to below 150kHz : -36dBm / 1kHz (2)150kHz to below 30MHz : -36dBm / 10kHz (3)30MHz to below 1000MHz : -36dBm / 100kHz (4)1000MHz to below 12.75GHz (excluding 1884.5 to 1919.6MHz) : -30dBm / 1MHz (5)1884.5MHz to 1919.6MHz : -41dBm / 300kHz |
||
| Tolerene of unwanted emission intensity (Intermodulation product) | When -40dBc signal detuned from the desired frequency by ±5MHz
or ±10MHz is supplied; Desired frequency ±5MHz : -31dBc Desired frequency ±10MHz : -42dBc |
||
| Antenna power | Designated value | 0.25W or less | |
| Tolerance | 21dBm or less: +87%, -47% Over 21dBm: +48%, -58% |
||
| Tolerance of adjacent channel leakage power | At 5MHz detuning; Lower than antenna
power by 32.2dB / 3.84MHz or more, or -50dBm / 3.84MHz or less and At 10MHz detuning; Lower than antenna power by 42.2dB / 3.84MHz or more, -50dBm / 3.84MHz or less |
||
| Leakage power at no-carrier transmission | -63dBm / 3.84MHz or less in the transmission frequency range | ||
| Limit of secondary radiated emissions | (1) 2010MHz through 2025MHz | -60dBm / 3.84MHz or less | |
| (2) 30MHz to 1000MHz | -57dBm / 100kHz or less | ||
| (3) 1000MHz to below 12.75GHz (excluding 2010 - 2025MHz) | -47dBm / 1MHz or less | ||
Note: This technical standard applies also to a radio station that simulates a land mobile station used for communications for test of TD-CDMA equipment.
| Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations. |