|
Items |
Technical standards |
||||||||||||||
| Assigned frequency or designated frequency | 832 - 834MHz, 838 - 846MHz, 860 - 885MHz (Receiving frequency is lower by 55MHz) 860 - 895MHz (Receiving frequency is lower by 45MHz) |
||||||||||||||
| Tolerance of frequency | 0.05x10-6 | ||||||||||||||
| Tolerance of occupied bandwidth | 1.48MHz | ||||||||||||||
| Tolerance of spurious emission intensity and adjacent channel leakage power | (1)815 - 850, 887 - 889, 893 - 901, 915 - 925MHz |
|
|||||||||||||
| (2) Other frequency band than the above in the range of 885 - 958MHz |
|
||||||||||||||
| (3) Other frequency band |
|
||||||||||||||
| Antenna power | Designated value | 120W or less | |||||||||||||
| Tolerance | +59%, -61% | ||||||||||||||
| Transmission rate | Circuit exchange system : 64kbit/s or less Packet switching system : 144kbit/s or less System capacity : 2Mbit/s or less |
||||||||||||||
| Limit of secondary radiated emissions |
|
||||||||||||||
| Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations. |