Land mobile station for CDMA cellular radio telephone

Land mobile station for CDMA cellular radio telephone
(Item 11 of Article 2 Paragraph 1 of Certification Ordinance)

Items

Technical standards

Assigned frequency or designated frequency

887 - 889MHz, 893 - 901MHz, 915 - 940MHz
(Receiving frequency is lower by 55MHz)
815 - 850MHz
(Receiving frequency is lower by 45MHz)

Tolerance of frequency

300 Hz

Tolerance of occupied bandwidth

1.48 MHz

Tolerance of spurious emission intensity and adjacent channel leakage power

(1)815 - 850, 887 - 889, 893 - 901, 915 - 925MHz

At detuning of 0.9 - 1.98MHz;
	-42dBc / 30kHz
At detuning of 1.98MHz or more ;
	Over 1W : -54dBc / 100kHz
	1W or less: 25µW / 100kHz

(2) Other frequency band than the above in the range of 885 - 958MHz

At detuning of below 1.98MHz;
	Over 1W : -60dBc / 30kHz or 2.5µW / 30kHz
	1W or less : 25µW / 100kHz
At detuning of 1.98MHz or more ;
	Over 1W : -60dBc / 100kHz or 2.5µW / 100kHz
	1W or less : 25µW / 100kHz

(3) Other frequency band

At detuning of below 1.98MHz;
	Over 1W : -60dBc / 30kHz or 2.5µW / 30kHz
	1W or less : 25µW / 300kHz
At detuning of 1.98MHz or more ;
	Over 25W : -60dBc / MHz and 20mW / MHz
	25W or less : 25µW / MHz

Antenna power

Designated value

1W or less

Tolerance

+20%, -50%

Leakage power at no-carrier transmission

Below -61dBm / MHz

Transmission rate

Circuit exchange system : 64kbit/s or less
Packet switching system : 144kbit/s or less
System capacity : 2Mbit/s or less

Limit of secondary radiated emissions

Receiver for 832 - 834, 838 - 846, 860-885MHz ;
	832 - 834, 838 - 846, 860 -885MHz : -81dBm/MHz 887 - 889, 893 - 901, 915 - 940MHz : -61dBm/MHz Other frequencies : -54dBm / 30kHz
Receiver for 860 - 985MHz, which is used in combination with 815 - 850MHz ;
	860 - 895MHz : -81dBm / MHz 815 - 850MHz : -61dBm / MHz Other frequencies : -54dBm / 30kHz

Overrall operation test

Automatic identification of transmitter
Frequency selection
Automatic control of antenna power

Notice: Regulations in the Ordinance Regulating Radio Equipment shall have priority over the descriptions in the sheet when any difference is found between them. Further above descriptions do not cover all of the regulations.